這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player


這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player




Index > Products > Alloy Ceramic Mica Series > CB-680N

Alloy Ceramic Mica

CB - 680N



Composite Thermoplastic

Composition:

60% of Nylon PA-66 and 40% of CB-680N filler Properties of Composite Thermoplastic:

-Appearance Color: White

- Thermal Conductivity: 0.7 W/m-K

- Thermal Diffusivity: 0.8 mm2/s

- Heat Capacity: 0.9 MJ/m3-K

Introduction

CB-680N, a kind of alloy ceramic material with fine particle size, is composed of ceramic mica powders and Boron Nitride(BN). Several physical properties of CB-680N are advantage to industrial application, especially in plastic related industry; such as high thermal conductivity, high thermal diffusivity, low hardness, and well dispersion in resin.


★To reduce the cost of fillers.
★To improve the dispersion in compound system and increase the maximum dosage amount of fillers.
★To enhance the performances of composite thermoplastic, ex. HDT, heat conductivity, anti-yellow aging, weatherability, and increase flexural strength, etc.



Packing and Storage

Standard package: 10 kgs of Alloy

Ceramic Mica-BN powders packed

in PE laminated Kraft paper bag.


Shelf life is up to 180 days if stored under

cool and low humidity condition.





Remarks

Compounding Application


1. When using CB-680N as filling powder, a twin-screw extruder, which equipped with a side-feeding system in front of extruder, should be applied.


- CB-680N powder feed in system via side-feeding system.

- If there is no side-feeding system in the front of extruder, two separated feeders should be prepared that one for resin while CB-680N filling powder, the other.


2. In order to avoid the return flow of fed resin, the upstream temperature of extruder should be 5~10℃ higher than downstream.


3. CB-680N filling powder should be fed in system after the plastic feeding process is stable.


4. The recommend dosage of CB-680N is 40 wt%~50 wt% of composite plastic.